November 21, 2026

How to Charge for Revisions Without Losing the Client

All articles

How to Charge for Revisions Without Losing the Client

Editor and client reviewing an extra revision fee

You charge for revisions by deciding before the project starts what a round is, how many rounds the fee includes, and what happens after the last one. Then you keep a record of every round so that the invoice for extra work is a matter of fact, not an argument. Clients rarely resent a fee they agreed to in writing. They resent a surprise. Posthive, a post-production workspace with version control and client feedback and approval tracking, keeps that record in one place, so the round count is never a matter of memory.

Posthive
Keep Revision Feedback Organized
Posthive brings version management, task tracking, and team collaboration together to help creative teams keep revision workflows clear.

TL;DR

  • A revision is one consolidated batch of feedback on work already in scope. A request for something new is a change request, and it carries its own cost and timeline.
  • Two included rounds per deliverable is the common starting point. Complex or multi-approver work may justify three, and tightly defined short pieces may justify one.
  • Price extra rounds three ways: a day or hourly rate, a new fixed quote, or a formal change request. Get written approval before starting.
  • Put the round definition, turnaround times, delayed-feedback rules and sign-off process into the proposal, not into a later email.
  • Tell the client when the included rounds are used up, quote the next round, and begin only after they approve.

Table of Contents

What counts as a revision and what is new scope

The whole conversation about money depends on one line: where does a revision end and new work begin? Get this wrong and you either give away hours or start fights over things the client honestly thought were included.

The ProCopywriters guidance on feedback and revisions defines a revision as a set of changes based on one consolidated round of feedback. Asking for something additional is a different thing: it should be handled as a change request with added cost and timeline implications. The same guidance says some fixes are never billable extras: objective problems such as factual errors, unclear messaging or missed requirements need correcting regardless.

A workable test is to hold the request up against the original agreement. Look at the deliverables, quantities, creative direction, responsibilities and schedule assumptions you both signed off. NotionAssets lists the usual signs of new scope: added deliverables, extra pages, new formats, a substantially different direction, or a material change to the timeline. OwnerMath adds new strategy direction and late changes from a stakeholder who was not part of the original brief.

Examples from post-production

  • “Trim the intro by four seconds and swap the second music cue for the alternate we discussed.” This is a revision: feedback on a cut that exists.
  • “Can you also deliver a vertical 9:16 version for social?” That is a new deliverable and a new format, so it is new scope.
  • “We have rethought the whole message, so please re-cut around the new script.” That changes direction after approval, so it is new scope, priced as a new phase.
  • “The speaker’s name is misspelled in the lower third.” This is an objective error. Fix it.

The point is not to be stingy. The point is that the client can see the line before they cross it. A short list of examples in your proposal, like the one above, does more than a paragraph of legal language.

What counts as one round

Most disputes about “how many revisions” are really disputes about what a round is. If every email with a comment counts as a revision, the client will burn through ten in a day. If nothing counts, you will do unlimited work.

The usual definition is one set of changes based on a single, consolidated batch of feedback, not a stream of individual comments. Scopeezy suggests defining a round as consolidated comments on a submitted deliverable and naming which deliverables receive how many rounds.

Two habits make this definition enforceable:

  1. Name one client contact. When five people send notes separately, you get five rounds disguised as one. One person gathers the notes and sends them together. Our guide on how to consolidate feedback into one clear set of revisions walks through that step by step, and the idea behind it is simple: feedback loops work when comments arrive as a single batch.
  2. Set a feedback window. A round that starts when the cut is delivered and ends when consolidated notes come back keeps the schedule honest. See how to set client feedback windows.

A round also means something different in each discipline. Mediabistro’s guide for agencies stresses that design may be round-based, copywriting draft-based and video production cut-based. For an editor, a round is normally a new cut delivered against one batch of notes.

How many rounds to include

There is no universal number, but the guides converge on a narrow range. The Mediabistro piece says agencies commonly include two to three rounds, with extra rounds charged hourly or per round. Its examples include two to three concept rounds plus one to two refinement rounds for brand identity, two copy drafts, and two to three video cuts.

How many rounds to include

Brievora recommends starting at two rounds per deliverable. Add a round when there are multiple approvers or the work is foundational and creative, and take one away for tightly defined short pieces. It also suggests estimating how long each included round takes and building that time into the project fee, so the “free” rounds are not really free to you.

West Melbourne Studios gives video-specific guidance: two rounds are typical for production studios, three may suit complex editorial or multi-stakeholder campaigns, and one can suit fast-turnaround work with a tight spec. Its examples are two rounds for a tightly scoped 60-second brand video with a single decision-maker, and potentially three staged rounds for a 10-minute corporate documentary that needs board approval.

Project type Typical included rounds Reasoning
Short brand video, one decision-maker 2 Few opinions, clear brief
Fast-turnaround social cut, tight spec 1 to 2 Spec leaves little room for interpretation
Documentary or multi-stakeholder campaign 3, staged More approvers, more risk of late changes
Graphic design per deliverable 2 Common policy example, with direction changes quoted separately

The figures above are starting points from the guides, not rules. Set the number from how many people approve the work and how much of the creative direction is still open.

Three ways to price extra rounds

Once the included rounds are used, you need a method that is simple to explain. The Creativepool guide to negotiating payment lists three: charge at your standard day rate, issue a new fixed quote, or use a formal change request. Whichever you choose, it should be approved before you begin. For more on how creatives frame hourly, day-rate and fixed-quote pricing, that approach to the numbers is the same across visual disciplines.

Method Best when Watch out for
Hourly or day rate The extra work is small and hard to predict The client may worry about an open-ended bill, so give an estimate
Fixed fee per extra round Rounds are similar in size Set it when you write the policy, not when you are annoyed
New fixed quote or change request The request adds deliverables or changes direction Needs its own scope, timeline and sign-off

For a concrete number, Brievora’s example clause includes two rounds and sets an additional round at $180, or $90 per hour if the work takes more than two hours, subject to written approval. Treat that as an illustration of the structure: a flat fee for a typical round, an hourly fallback for a heavy one. Your figures should come from your own rate and how long a round takes you.

Scopeezy’s advice is to state the pricing method in the clause itself (hourly, daily or fixed), confirm the timing, and get written approval before extra work starts. That order matters: price, timing, approval, then work.

What to write in your proposal or contract

The revision policy belongs in the document the client signs. According to ProCopywriters, it should state:

  • how many rounds are included and what constitutes a round;
  • the turnaround time for each revision;
  • what happens if feedback is delayed;
  • what happens if more revisions are needed;
  • the feedback and sign-off process, including a named client contact and a request for consolidated feedback.

Here is a plain-language clause you can adapt:

The fee includes two rounds of revisions per deliverable. A round is one set of changes based on a single consolidated set of feedback from the named client contact. Requests that add deliverables, formats or change the agreed direction are quoted separately and begin after written approval. Additional rounds are billed at the agreed rate.

If you want to go deeper on the contract side, our guides on fixing revisions in two included rounds with SOW rules and on creative change requests cover the wording and the workflow.

A good quote also records its assumptions. Creative Boom’s illustration pricing guide notes a quote can specify project assumptions such as licensing and two rounds of revisions. Editors can do the same: runtime, number of cuts, delivery formats, and rounds.

How to explain the fee and handle pushback

The conversation about extra fees goes best when the client has heard about it twice already: once in the proposal, once when the rounds run low.

  1. Define rounds up front. Creativepool’s advice is to define revision rounds and state that work outside the agreed scope will be quoted and approved before it begins.
  2. Notify at the last included round. Sengi’s guidance is to tell the client when the included rounds are used, quote the extra round, and begin it only after they approve. Their policy examples include a graphic design policy with two rounds per deliverable, and a rule that a creative-direction change after concept approval becomes a separately quoted phase.
  3. Confirm material changes in writing. Anything that affects money, timing, deliverables or rights goes in an email or the project record, not only a call.
  4. Frame it as structure. Sengi argues that presenting a revision policy as professional project structure, rather than a restriction, helps clients understand the boundary and the cost of extra rounds.

When a client disputes a charge

Stay with facts. Point to the clause they approved, the date each round was delivered, and the consolidated notes that started each one. If a request is really an objective error on your side, fix it without charge; that protects the relationship and the credibility of every other charge. If it is new scope, offer a quote with the timeline impact and let them decide.

What makes this easy is a log. When the round history sits in one place, with versions, comments and approvals attached, there is little left to debate. Our client feedback template and guide to enforcing two rounds show how to keep that log.

Keep the count with Posthive

Charging for revisions only works if you can show what was delivered, when, and what the client approved. Posthive is a cloud post-production workspace that brings version control, task and deadline tracking, collaborative review tools, and client feedback and approval tracking into one place, with Google Calendar integration for deadlines. Every plan includes unlimited free seats, so clients and teammates can review and comment without you paying per editor.

The Pro plan is $49 per month and Enterprise is $99 per month, and there is also a free plan. You can compare them on the Posthive pricing page.

Posthive

For the day-to-day side of keeping comments tidy, see how creative teams close feedback rounds and our rules for video comment management.

Our perspective

Most revision fights are not about money. They are about a missing record. The editor remembers three rounds, the client remembers one, and neither can point to a version.

We built Posthive around the idea that clients should keep ownership of their deliverables and versions, and that review should happen where the work lives. When each cut is a numbered version, each batch of notes is attached to it, and approval is recorded, the question “was that round two or round three?” answers itself.

That is also why we offer unlimited free seats on every plan. A policy of consolidated feedback from a named contact only works when the client’s reviewers can actually get in and comment without a licensing hurdle. Pricing extra rounds should be a calm, factual step, not a negotiation from memory.

Lorenz

FAQ

How many free revisions should I include?

Two rounds per deliverable is the most common starting point in the guides. Add a third for multi-stakeholder or foundational creative work, and consider one for short, tightly specified pieces. Estimate how long each round takes you and build that time into the fee.

Should I charge hourly or a flat fee for extra rounds?

A flat fee per round is easiest to explain when rounds are a similar size. An hourly rate suits small, unpredictable changes, and a new fixed quote suits requests that add deliverables. Whatever you choose, state it in the contract and get approval before starting.

What if the client says a change is just a revision?

Compare the request with the signed scope: deliverables, formats, direction and schedule. If it adds something or changes the direction, it is new scope and gets a quote. If it is a correction of an objective error, fix it at no charge.

Do I charge when feedback arrives late?

Your policy can say what happens when feedback is delayed, for example that the schedule moves with it. Write that into the proposal so a late round is handled by the agreement, not by a difficult conversation.

Sources